Whether you’re looking to complete a DIY project or putting together a project in an industrial setting, you need to have the right fasteners to keep everything secured and safely in place. Socket screws are one of the strongest fasteners you can use on a job.
High-quality socket screws can be used in a variety of applications, it’s just a matter of knowing which one to pick. On the job or as a DIY enthusiast, you need the right tools and materials for a job well done.
Different Socket Screw Types
Let’s start with the basics and identify the different types of socket screws that you’re probably going to come across. These are the most commonly used socket screws but there are also more niche versions that you may or may not have already encountered.
Socket head cap screws. The single most common type of socket screws that you are going to see. Has thick side walls and a deep hex recess, giving it the highest preload ratings. Much stronger than your average screw and versatile, too.
Socket set screw. These are designed specifically for use where there are components on shafts necessary. A bit niche but works great for the intended purpose.
Flat head socket cap screw. These are countersunk so you don’t see them above the surface of the material. Think of them as working in the same way that something like a drywall screw would. These are great for use in machines where tolerances are closer and head height is crucial.
Low head socket cap screw. Compared to your average socket cap screw, these have a head roughly 50% lower. If you’re working with very particular height restrictions, these are the way to go. Just keep in mind that the maximum preload is far less, so they aren’t just interchangeable with your average socket head cap screw.
Button head socket cap screw. The button head has a rounded profile, great for additional safety. Bolts and screws can snag, especially when it comes to moving machinery, and button head socket cap screws can help limit those instances.
More About Socket Head Cap Screws
Since they are the most common type of socket screw out there, let’s focus on the socket head cap screw. You might hear them called socket head bolts, too, and these are roughly 20% stronger than your average Grade 8 hex screw.
Depending on the manufacturer, you might need to also consider the environment that you’ll be using these screws. Since their tensile strength is higher, they can serve some seriously heavy-duty applications.
Benefits of Socket Head Cap Screws
While there are a few subcategories of the socket head cap screw, they all have some pretty similar benefits when using them. For instance, the hexagon drive that they have offers better locking strength because of the way that it’s threaded. For pieces that experience a lot of vibration, having a socket head cap screw can eliminate the issues that go along with all that movement.
The low head, button head, and flat head socket screws have a high rating but are 10,000 psi lower than the average head cap screw because of the difference in the configuration of the head. How the screws are heat treated can play a major factor in the tensile strength, so if you have very specific requirements, check with the manufacturer rather than just assuming. Socket head screws are great for any job or project that requires better security and a much higher level of strength that the average screw can’t match.
